SumaGreen President Steve Elwell was written up in Prairie Star Magazine along with Dr. Allen Williams on how testing at the LHOP ranch in Kansas showed increases in Brix levels.
What this means to the farmer is that not only are the cattle, cows, etc eating healthier grasses but it also means the storage life of the Hay goes up. Higher Brix levels means that the shelf life of the hay will go up to a week or even a month longer then Hay with lower Brix levels.
What other testing has shown with SumaGreen Forage with Sumagrow inside is that the nutrients in the Hay actually have gone UP in the second and third cuttings. The future is endless for the SumaGreen products and how SumaGreen can profitably help farmers grown better crops while reducing their production costs. The increase in yields of 10-20% are usually all that matters but in this case knowing the Hay can last longer with higher Brix levels is giving those farmers extra days to sell their hay.
What does this mean to the cattle eating the Sumagreen Forage? Well it is like a person going to a buffet table instead of just being able to eat hamburgers everyday. You are going to eat more and more often which for the farmer means the Daily average gain on the cattle will go up. We have reports of cattle gaining between .2 - .5 pounds more a day compared to forage not grown with SumaGreen. What is that worth to a cattle rancher?
Results have come in from all over the world all showing the increase in yields, Increase in Brix, and higher nutrients in the soil.
Click here to read the article
Showing posts with label crops. Show all posts
Showing posts with label crops. Show all posts
Thursday, December 5, 2013
Tuesday, October 15, 2013
Simple steps to accurate sprayer calibration
Calibrating sprayers involves selecting the proper nozzles, spraying
pressure, and speed of travel. There are several different ways to
accurately calibrate a sprayer, but the simplest is the 1/128th acre
(340 sq.ft.) method, also called the “baby bottle” method. The spray
collected from a single nozzle measured in ounces directly converts to
gallons per acre regardless of the
number of nozzles on the boom. Because there are 128 ounces in a gallon,
the ounces collected from 1/128th of an acre will equal gallons of
solution per acre. Remember in most crops One Gallon of SumaGreen Ag with SumaGrow inside will treat one acre of crops mixed with 30 gallons of water.
Follow the 10 easy steps below to avoid needless chemical waste, improper application, and potential turf injury.
1. Fill sprayer with water. Use only clean water to calibrate sprayer.
2. Measure the distance (in inches) between nozzles on the spray boom. Then refer to chart below to obtain test course distance (in feet).
3. To check the uniformity of all nozzles on the boom, collect the spray from each nozzle for the same amount of time (ex. 1 minute). If the flow rate of any spray tip is 10% greater or less than that of the others, replace it. Whatever the type of sprayer tips you use, be sure they are all the same type.
4. Measure the course distance (in feet) according to the chart and flag it for easy visibility.
5. Drive the test course at an acceptable spraying speed with the sprayer on. Make note of the engine RPM’s, and most importantly, record the seconds it takes to travel the measured distance between the two flags. Be sure to take a “running start” to the beginning flag, and drive beyond the ending flag to maintain a uniform speed within the flagged distance.
6. Park the tractor/sprayer, set the brakes, but keep the engine RPM’s at the same setting used to drive the test course and make any final sprayer pressure adjustments (this will vary with the type of spray tips you use and the gallons per minute you wish to spray through them).
7. Using a plastic measuring container that is marked in ounces, collect the water sprayed from one nozzle for the same amount of time it took to drive the test course.
8. The amount of water collected in ounces will equal the gallons applied per acre.
9. Be sure to read all product labels for proper application information, use rates, etc.
10. While making applications maintain continuous engine RPM’s and ground speed used in test run.
Nozzle spacing and distance chart for 1/128th acre.
Nozzle Spacing (in) Distance (ft)
6 681
8 510
10 408
12 340
14 292
16 255
18 227
20 204
22 186
24 170
26 157
28 146
30 136
For a backpack or other single nozzle sprayers this same method will still work. Simply determine the width of the spray pattern to get the distance. Or, fill the sprayer completely with water then spray an area equal to 340 sq. ft. (20’ x 17’). The ounces of water required to refill the sprayer will equal gallons per acre.
Credit to Dr. Wayne Wells is an Extension Professor and Turfgrass Specialist at Mississippi State University.
Follow the 10 easy steps below to avoid needless chemical waste, improper application, and potential turf injury.
1. Fill sprayer with water. Use only clean water to calibrate sprayer.
2. Measure the distance (in inches) between nozzles on the spray boom. Then refer to chart below to obtain test course distance (in feet).
3. To check the uniformity of all nozzles on the boom, collect the spray from each nozzle for the same amount of time (ex. 1 minute). If the flow rate of any spray tip is 10% greater or less than that of the others, replace it. Whatever the type of sprayer tips you use, be sure they are all the same type.
4. Measure the course distance (in feet) according to the chart and flag it for easy visibility.
5. Drive the test course at an acceptable spraying speed with the sprayer on. Make note of the engine RPM’s, and most importantly, record the seconds it takes to travel the measured distance between the two flags. Be sure to take a “running start” to the beginning flag, and drive beyond the ending flag to maintain a uniform speed within the flagged distance.
6. Park the tractor/sprayer, set the brakes, but keep the engine RPM’s at the same setting used to drive the test course and make any final sprayer pressure adjustments (this will vary with the type of spray tips you use and the gallons per minute you wish to spray through them).
7. Using a plastic measuring container that is marked in ounces, collect the water sprayed from one nozzle for the same amount of time it took to drive the test course.
8. The amount of water collected in ounces will equal the gallons applied per acre.
9. Be sure to read all product labels for proper application information, use rates, etc.
10. While making applications maintain continuous engine RPM’s and ground speed used in test run.
Nozzle spacing and distance chart for 1/128th acre.
Nozzle Spacing (in) Distance (ft)
6 681
8 510
10 408
12 340
14 292
16 255
18 227
20 204
22 186
24 170
26 157
28 146
30 136
For a backpack or other single nozzle sprayers this same method will still work. Simply determine the width of the spray pattern to get the distance. Or, fill the sprayer completely with water then spray an area equal to 340 sq. ft. (20’ x 17’). The ounces of water required to refill the sprayer will equal gallons per acre.
Credit to Dr. Wayne Wells is an Extension Professor and Turfgrass Specialist at Mississippi State University.
Monday, October 7, 2013
Potatoes with SumaGreen
Hear is how word spreads about SumaGreen. A
distributor in Minnesota Kevin Fields had a friend that heard about the
product and wanted to try it out on his own garden in Montana because he
thought it was to good to be true.
How many words is this picture worth?
Look at the side by side rows of potato crops in Montana. The SumaGreen treated side outperforming the untreated side which, by the way, was planted 2.5 weeks BEFORE the SumaGreen treated side.
Imagine the REAL difference if both were treated at the same time?
Contact us about results on corn, soy beans, forage, tobacco, cotton, wheat, tomato and any other crop you can think of growing.
How many words is this picture worth?
Look at the side by side rows of potato crops in Montana. The SumaGreen treated side outperforming the untreated side which, by the way, was planted 2.5 weeks BEFORE the SumaGreen treated side.
Imagine the REAL difference if both were treated at the same time?
Contact us about results on corn, soy beans, forage, tobacco, cotton, wheat, tomato and any other crop you can think of growing.
Subscribe to:
Posts (Atom)